Amcrest Forum

thank you Revo2Maxx the residual is around 74 - 81 Mbps [fluctuates] The total is 88 Mbps. Is there a setting on the cams that I can change to allow for inclusion of other 2 cams? Maybe the resolution or the compression? Not sure of what I speak. As an added note these cams do appear at times for a ...

I am wondering if anyone can explain why when I have 7 ip cameras only 5 will show on my NVR monitor.
There is space for 8 cameras on the display. The spaces where the 2 cameras should show have red locks on them.

Are you meaning Setup>Network>wifi in the NVR menu or the config tools menu? Thanks

I am having some trouble with 2 IP3M-943 cameras in wifi mode. 1st - they went black [no picture]with no error msg on window just an Amcrest symbol. No amount of fiddling, rebooting would bring them back. I took them down and hooked them to a cat cable and did a reset. Opened up the IP Config tool a...

Thanks @Revo2Maxx Maxx
I am checking on my NVR firmware to see if I need and update.
I have emailed Amcrest because I don't seem to be able to navigate their support too easily to find any downloads.
Everything else seems OK. All my cams are set to h.264h.

NVR = NV4108=HS IP cameras = 4 Amcrest 943 = 1 Lorex = 1 Dahua Problem 1] 3 of my Amcrest IP cameras are not showing on my NVR monitor. [1 wired, 2 wireless] When I sign into main menu > cameras all the cams have green status. The Amcrest config tool shows all cams. When I reboot the NVR, these 3 ca...

I am having trouble with one of my IP3M-943 cameras. I had it connected wirelessly and it kept losing connection [even though it is only 20 feet from router], so I ran a [new] cat cable and hooked it up. It is also hardwired electrically by a proper voltage adapter that has been checked and is worki...

Thank You very much, Revo2Maxx. The password was the problem. Also, thanks for all the help and info you have given me.

NVR = NV4108=HS IP cameras = 4 Amcrest 943 = 1 Lorex = 1 Dahua I have had to replace my router and reset all my ip cams. The resetting went well and all cams are viewable on internet explorer as a web page. However, none of the cameras are viewable on the monitor for the NVR. When going to Main Menu...

I currently have a outdoor security cam system. 5 cams: 4- Amcrest IP3M-943 1- Dahua IPC HFW1320S operating through an Amcrest nvr NV-4108-HS which is capable of having 7 cams on board. I would like to add one more cam, bullet style, outdoor that has audio. [outdoor, 8MP, night vision up to 98 ft., ...