Motion tracking works, but it cant seem to follow through the route I need. Even on Sensitivity 100, threshold 0. The camera being mounted upside down, there is a time when "right and left" on the PTZ actually makes the field rotate, rather than move right and left. (when the lens is pointed nearly straight down) I can manually make it go through this transition, but AI gets confused and stops each time as the person goes by. Then sits, and returns to preset.
What I would do is make 2 presets on the PTZ control.
Default is #1, and when no action is sensed, I want it to return there.
#2 can see the rest of the area I want, that the AI follow cant seem to transition to.
Before I pound me head TOO long against a wall.....
I know I can set up zones on the camera field.
Lets say I set up a detection zone in preset #1. When triggered, I want the camera to go to zone two.
NOW... while the camera is in preset #2, am I able to have another, discrete zone, only used on preset #2, drawn to trigger an event ?
IE: Am I able to have separate zones set up for different presets?
I googled, and the Google AI seems to think so.
- aZONES.png (143.21 KiB) Viewed 9352 times
Hope that made sense, it was somewhat difficult to describe.